This guide is about LED phototherapy equipment for clinics, medical aesthetic centres and salons — the floor-standing and arm-mounted units usually sold as PDT machines. It covers what the equipment is, how to specify it, how to evaluate a manufacturer, and what distributors serving this channel should ask before committing to a range.
One clarification first, because it causes confusion in search: in this industry “PDT machine” means a photodynamic therapy LED device used for skin treatment. The same abbreviation is used elsewhere for portable data terminals, which are barcode scanners and entirely unrelated.
What a PDT LED machine is
A PDT LED machine delivers multiple wavelengths from a single large treatment head, positioned over a client on a treatment bed. Compared with a handheld or wearable device, the defining characteristics are:
- Large treatment area — the head covers the full face or a substantial body area in one session rather than being moved around.
- Multiple wavelengths from one head — red, blue, and typically several additional colours selectable per treatment.
- Higher output — mains powered, with the thermal headroom to run at levels a wearable device cannot.
- Positioning hardware — height adjustment and a rotatable head so an operator can set treatment distance and angle precisely.
- Operator controls — a screen-driven interface with programmes, timers and intensity control, designed to be used by a trained practitioner many times a day.
SINOCO’s current platform, the TC-PDT-240W, is representative: 240W, LCD touch screen, a head that rotates through 360 degrees, and adjustable height.
Specifying clinical equipment
The specification priorities are different from consumer devices, because the buyer is a business that will run the machine commercially.
Output and treatment area
Irradiance still matters, but so does uniformity across the treatment field. A head that delivers a strong figure at the centre and much less at the edges produces uneven treatment, and practitioners notice. Ask for irradiance at the intended working distance and across the field, not a single peak number.
Duty cycle and thermal design
A clinic machine may run most of the working day. Consumer devices are specified for occasional sessions; clinical equipment needs thermal design and component ratings that tolerate continuous commercial use. This is one of the clearest dividing lines between equipment built for the channel and consumer hardware scaled up.
Interface and programmes
The operator is running treatments back to back. Preset programmes, a clear display and controls that can be set quickly matter more than feature count. Over-complex interfaces slow the clinic down and get used at one or two default settings regardless of what else is available.
Positioning and footprint
Treatment rooms are small. Height adjustment range, head articulation, base footprint and whether the unit moves easily between rooms are practical constraints that affect whether a clinic buys.
Regulatory position
Clinical equipment is more likely than consumer devices to be classified as a medical device, and the classification follows the claims made for it. Equipment marketed for a named dermatological condition sits differently from equipment marketed for general skin appearance.
This makes ISO 13485 the certification that matters most for this category — it is the medical device quality management system, and the framework regulators examine behind the product. Ask for the certificate number and verify it.
Establish the target market and intended claims before the specification is locked. The certification route affects component selection and documentation, and designing for it costs substantially less than retrofitting it after production.
Evaluating a manufacturer for clinical equipment
The stakes are higher than for consumer products: a clinic that buys a machine which fails mid-treatment loses revenue and clients, and comes back to the distributor rather than the factory.
- ISO 13485, verified, not just claimed.
- In-house R&D — can they modify the platform, or only assemble it? Ask what changes require new tooling.
- Service and spare parts — what happens when a head or driver fails in year two? Commercial buyers will ask you this.
- Failure rate data from recent production runs.
- Documentation — manuals, test reports and the paperwork your market requires at customs and for clinic insurance.
- Production capacity against your forecast, including whether they can supply consistently rather than in one batch.
What can be customised
- Wavelength set and the number of selectable colours
- Output power and treatment head dimensions
- Head articulation and stand or arm design
- Interface: screen size, preset programmes, language
- Housing colour, finish and branding
- Trolley, castors and accessory mounting
- Manuals, packaging and market-specific documentation
Frequently asked questions
What is the difference between a PDT machine and an LED mask?
Scale, power and who operates it. A PDT machine is mains-powered clinical equipment with a large multi-wavelength head on positioning hardware, run by a practitioner. An LED mask is a worn consumer device at much lower output. They are not substitutes for each other.
Does “PDT machine” mean photodynamic therapy?
In this industry, yes — LED phototherapy equipment for skin treatment. The same abbreviation is used for portable data terminals in logistics, which is a different product category entirely.
Can the wavelength set be changed?
Yes, this is a routine customisation. Adding channels increases LED count, controller complexity and cost, so it is worth confirming the extra modes will actually be used in treatment protocols.
What MOQ applies to clinical equipment?
Lower unit volumes than consumer products, but higher value per unit. Branding and interface changes on an existing platform have a modest minimum; a new housing requires tooling and a correspondingly higher run.
Do you supply clinics directly?
No — we manufacture, and distribution is handled by our customers. If you supply clinics or aesthetic centres, the PDT platforms are the products most often branded for that channel.
Talk to us about your project
SINOCO has manufactured LED phototherapy equipment in Shenzhen since 2005, from a 10,000 m² facility certified to ISO 9001, ISO 13485, ISO 14001 and ISO 45001, with more than 30 national patents.
See the beauty light therapy range for the clinical and salon platforms, or the general OEM and ODM sourcing guide for how a private-label project runs. Send your specification through the contact page.