
TL;DR: 60 Seconds, and you have chosen your Red Light Mats Supplier!
A good red light mats supplier will be able to provide you with three documents: the measured performance which includes the wavelength and the irradiance of the light, along with the distance at which the light was measured, the compliance documents for your market, and the factory proof (QC records, real production line, sample that you can test).
The most commonly misread number is irradiance (mW/cm²). Always ask where the measurement was taken (on top or off top), and what type of measurement it is (peak or average measurements). It is important to note that the two mats with “30” and “130” are not necessarily comparable.
Calculate maths doses you can do yourself: Dose (J/cm²) = irradiance (mW/cm²) × time (seconds) / 1000. For example, 30 mW/cm² for 10 minutes is 18 J/cm².
In the US a mat can be marketed as a general wellness product (no disease claims) or 510(k) cleared for specific uses. The terms “FDA registered” and “FDA cleared” are not interchangeable, nor is “FDA approved”. The path you follow depends on your marketing claims.
Prior to ordering in bulk: get an LM-style light output test report, a spectrometer check, safety and EMC reports (CE, FCC, RoHS and IEC 60601 if applicable), 2-3 samples, and a signed spec sheet you can test the batch against.
Look at a real-life example: our ‘red light mat’ page includes wavelengths, power, size, plug types and voltage information and we also offer private label OEM service.
The decision of selecting a Red Light Mats Supplier is not as easy as it may seem.
Let’s take the buyer’s point of view. Whether you’re on some B2B marketplace or not, search for the supplier of red light mats, and you’ll see hundreds of listings that sound the same: “660nm + 850nm, high irradiance, medical grade, CE FCC RoHS, OEM welcome. The pictures are alike. The term used is similar. The prices are not.
There’s a genuine reason for that price difference. An LED quality, driver design, materials and safety testing and quality control are all unseeable from a listing image and each one alters what you actually get. The buyer that focuses on price alone will find out the difference six months down the road when there are dead spots on the mat, the controllers are toasting in the background, the output is fading, the buyer is requesting the mat be returned, and most importantly, the buyer is misled with a claim they can’t legally provide.
This guide is designed so that you don’t have to open another tab. It includes what a red light mat is, what specs are important, how to read them, what compliance paperwork to request, how to check out a factory, how to test samples, some of the common mistakes I see and a copy and paste RFQ.
One note on tone. Not providing medical advice, I am describing products and buying practice. No item in this guide is a guarantee of the treatment of any condition.
What is a Red Light Therapy Mat?

A red light therapy mat, also known as a full body red light mat, red light pad or red light bed, is a flat surface, typically flexible or semi-rigid, that is covered with a layer of LEDs which are lights that emit red and near-infrared light. The user is lying on it or uses it against a part of the body, and uses a time limited session.
The most popular mats are made with a mixture of the following:
- Red light, usually within the 630-660 nm range
- Near-infrared (NIR), typically around 810, 830 or 850 nm (some add 940 nm)
- A controller that can be programmed with timers and intensities.
- Heating, pulse modes, app control, storage bag are optional extras.
Typically referred to as photobiomodulation (PBM), this science is the use of light at an irradiance that is below the level of causing tissue heat, but with the goal of changing biological activity. The same definition, which is used in US regulatory guidance for these devices, is a good one for suppliers as well, as it reminds you to remember that “non-heating” and “heating” products are treated differently.
To understand the difference between Mats, Panels and Wraps, you have to understand where each is used.
Format Typical use Strengths Limits
Neoprene and TPU (thermoplastic polyurethane) flexible mat: lying down, back and body contact, conforms to the body, close distance, easy to store: connectors and flexing are weak points.
Rigid mat / bed-style (aluminium body) Fixed home or spa set ups Durable, with good heat sinking Heavier, less portable
Manual 1: Standing or distance use High irradiance at distance Takes wall/stand space
Compact, easy to wear, Coverage, Smaller, Targeted body areas, Wrap, belt, knee/elbow pad
When creating a range of products rather than just one, consider our other companion products including our red light therapy blanket, knee and elbow wrap and helmet, all part of our wellness light therapy range.
When looking for a red light mat supplier, there are certain specs that should be taken into consideration.

The wavelength (and its purity).
Request the peak wavelength for each type of LED and spectral spread. Typical combinations are 660 nm (red) and 850 nm (NIR). Some suppliers add 630 nm, 810 nm, 830 nm or 940 nm. More wavelengths is not necessarily better; ask about the purpose of each and its percentage of LEDs. For instance, a popular brand comes with a triple-chip LED that is approximately 1/3 red and 2/3 NIR—you want to see the ratio.
Request: Spectrometer plot from production batch unit and NOT a stock graph.
Irradiance (mW/cm²): read the footnote
Optical power per square centimetre is called the irradiance. It’s the number you see in the headline on all of the listings and the most misused number. There are two published examples to illustrate why it is not always possible to compare headlines:
- A single flexible full-body mat shows approximately 30 mW/cm² at the surface, right above an LED.
- A second listing states: 0 inches, 130 mW/cm2.
- Typical figures for panels are about 120-200 mW/cm² at a distance of approximately 6 inches (15 cm).
Those numbers are in reference to different products, distance and measurement method. When you are given any number, you should ask:
- What was the distance measured?
- Is it a maximum (right above one LED) or an average of the area (right above all LEDs)?
- Which meter and which calibration?
- Was it measured after the unit warmed up (LED output decreases as unit warms up)?
For every buyer, there’s a maths that should be known, which is called Dose (J/cm²).
Dose (J/cm²) = Irradiance (mW/cm²) × Time (s) ÷ 1,000
- 30 mW/cm² × 600 s (10 min) ÷ 1,000 = 18 J/cm²
- The 30 mW/cm² x 60s / 1,000 = 1.8 J/cm² per minute (which is the same as the per minute figure in a published branded mat, which is a nice sanity check)
This allows to confront a supplier’s claims: if a supplier says it reaches a very high dose in a very short time, then this must be quite high, and you should request the measurement from the supplier.
This is not a treatment recommendation. Exposure and appropriate use should be obtained from the instructions for use of the product and from a qualified professional.
4.4 LED count, layout and uniformity
More LEDs is more impressive, but uniformity is key – no cold spots, no sharp edges in the pattern. Please have a map of the grid that is measuring it (usually 9 or 15 points across the mat). A mat that has a smaller number of LEDs that are driven with more current can outperform a mat that has a larger number of LEDs that are under-driven.
I do a quick plausibility check I use: electrical input power / mat area. Our listed mat is 80 W over 1390 × 991 mm (about 1.38 m²), so roughly 58 W/m² of electrical input. Do not compare to other quotes of similar sizes that compete with you. With a very high irradiance from a very small wattage over a large area, ask your supplier how they have determined that.
Materials and build
Flexible mats: Face fabric (neoprene, TPU, PU leather), stitching, mounting of the LED board, flex fatigue, cable strain relief, connector type, and cleaning method. For rigid designs: housing material, finish and heat sinking. The spec list on our mat suggests aluminium body and white painting, very hard wearing and thermally beneficial.
The surface temperature and heat of the earth.Surface temperature & heat of earth.
All “non-heating” mats get warm when used. Request the surface temperature after 20 minutes at maximum setting in a room temperature of 25 °C. Built-in heating products should be identified as to temperature range and have over-temperature protection.
Controller, timer and power
Find a clear timer, intensity steps, automatic time off and a power supply that is compatible with your market. For multi-market distribution, Sinoco’s mat page specifies input of 100-277 V AC, 50-60 Hz and AU, UK, EU and US plug types.
Pulsing and flicker
If there are modes available for a mat (such as 10 Hz or 40 Hz), request the actual waveform and duty cycle. If the driver isn’t in good shape, a flicker can of course be added on the unintended side, so use a slow-motion phone video at low light levels.
Shorthand for what ‘good’ is:
Spec Red flag Reasonable standard Ask for
Samples’ spectral plots, batch samples Unspecified “red + infrared” Stated Peaks with ratio (e.g. 660/850 nm)
Irradiance – One number, no distance – Number + distance + peak/average – Test report, method note
Uniformity: only, even coverage, or Grid map with min/max 9-15 point readings
Temperature Not indicated Data measured after 20 minutes (thermal test)
Safety CE/FCC logos only Test reports for your model Full reports, not logos
Warranty: None or vague, 1-2 years written, or signed terms
Unmarked and no cut-off Controller Timer, steps, auto shut-off Spec sheet, manual
Compliance: What a Serious Red Light Mats Supplier Must be able to prove:
I think the biggest difference between serious suppliers and unserious suppliers is their level of compliance. I’d break it down into four sections.
Electrical safety and EMC (market access)
- EU: CE marked to conform to the Low Voltage Directive (LVD) and EMC Directive and RoHS. Request test reports stating your model or a well-explained series.
- US: FCC (electromagnetic compatibility) for the electronics. If your retailers and channel need them, electrical safety listings like ETL or UL are another helpful bonus.
- UK: UKCA marking is similar to that of the EU. CE transition dates have changed in the past for CE acceptance, please check current government recommendations before shipping.
- Other markets: SAA (Australia) is a common one and a CB test certificate also assists with national approvals.
2. Medical-device grade standards (if applicable)
Some suppliers have IEC 60601 (safety family for medical electrical equipment) and IEC 62471 (photobiological safety of lamps) certified. Depending on your target market and claims, you may require these, ask your certifier. If they are specified by a supplier, request the report and read the scope.
A number of buyers mix up the three phrases that FDA uses for its status.
- General wellness: The US FDA policy is for a product to not make disease claims and to promote general wellness (which is considered low risk). Numerous consumer red light products are sold without prior to-market review.
- 510(k) cleared: FDA has reviewed a particular product for a particular purpose. The regulatory guidance outlines Class II products, including a powered, light-based, non-thermal instrument for adjunctive use in pain therapy for light-based PBM devices.
- Registered by FDA: this usually means that the establishment is registered and the device is listed. This is not a FDA clearance or approval and if you see the word “approved” used in the brand’s marketing, it’s a red flag. That is why some well-known brands refrain from using that language.
This means for you that you make your decisions regarding claims first. If you would like to make claims like “relieves pain” or “treats arthritis”, you are likely to be on a different regulatory route to a product you may describe as a “relaxation and wellness” product. Inquire from your supplier about the documentation route they follow and obtain legal and regulatory counsel for your intended country.
Quality system
Inquire about the factory’s quality management system, for example ISO 9001 or for medical-related products, ISO 13485. As with any supplier, ask to see the certificate as Sinoco states they are ISO 9001, ISO 13485, ISO 14001 and ISO 45001 certified and the certificate, scope and expiry date.
The rule I follow
A listing with a logo does not equal a certificate. Request the PDF report, verify the model number, lab name and date, and make sure the lab is accredited.
Using the following 10 questions to vet a Red Light Mats Supplier.
- Are you a manufacturer or trader? (Ask for the factory address and a video call walkthrough.)
- Retail vs. in-house or outsourced manufacture of the PCBs and the LEDs?
- Which brands of LED’s use, and is this documented?
- What type of driver/power supply is used and are they certified?
- How many hours is the burn-in process and what is it?
- Are there in-house measurement devices (spectrometer, irradiance meter)?
- How to monitor batches and what to do when a defect is detected six months after the production?
- What changes do you let me know about (LED, driver, changes in material, supplier)?
- Are there PDFs of my exact model of the certificate?
- What’s your warranty? What do you do if a claim is made?
The factory that responds promptly to these questions, specific, usually is the one that you should continue talking to. Hesitations or generic responses are information too.
What to expect from MOQ, Lead Time and OEM/ODM?
The published listings on the market can differ significantly for this category. Some panels indicate that they have a MOQ of 1, with sample order lead times of approximately 1 week for orders of less than 10 pieces, 2 weeks for orders of a few dozen, and “to be negotiated” for larger orders. Generally custom products take longer as they have to go through the process of tooling, firmware, packaging and testing.
Standard OEM/ODM features on a mat:
- Private label logo and packaging.
- Two different combinations of wavelength and ratio have been used.
- Size and shape
- The layout of the controllers and presets for the timers are discussed.
- The type and voltage of the plug.
- Use of cloth or coloring in the cover.
- Adjustable heating, pulse modes and app control are optional.
Any moq and lead time is merely a starting point, verify the moq and lead time in writing with your spec, and include shipping and testing time. For information on how a private label project works, please check our OEM page and give us a call describing your specifications.
What is the cause of red light mat’s price?
I’ve seen one high quality full-body mat sell for around US$1,199 MSRP and generic mat and panel listings on the marketplace are much lower. The gap is due to:
- The quality and quantity of the LED’s (and how hard they are driven)
- The quality of the drivers and power supply.The quality of the driver and power supply.
- Filler and fabric (neoprene vs. less expensive fabrics)
- In addition to the controller buttons and functions, you will find the following features: App, timer and steps.
- Testing & certification expenses
- After-sales and warranty service.
- The part of the retail price that covers the costs of brand, marketing and distribution.
- Order quantity
The typical landed cost formula is so easy to use.
Landed cost per unit = ex-works price + packing + freight per unit + import duty and tax + testing/certification share + warranty reserve.
The import duty depends on the classification of the product by the customs office (which can change with variations in design and claims) and the rate for your country on your margin before finalising. Ask a customs broker for the classification and rate for your country before you finalise your margin.
A 7 Step Sample Test Plan Before You Place a Bulk Order
- Order 2–3 samples. One unit masks unit-to-unit variation.
- Have a spec sheet signed with wavelengths, LED type, power, size, materials, controller, plug type and warranty.
- Use a simple power meter to measure the wattage at the wall, and compare to the advertised wattage.
- Use a spectrometer and calibrated meter to determine the wavelength and irradiance or send one sample to a local lab. Measure the distance that your marketing will refer to.
- Measure uniformity on the mat at 9-15 locations.
- Perform a burn-in on a sample using 72 hours at full power and look for hot spots, controller heat, fading or failure of the LEDs.
- Focus on the build: flex the flexible mat multiple times, pull the cable, wipe clean the cover and check the seams, labels and packaging.
Use one approved sample as a golden sample and label it with the supplier’s name and the date. If it’s a bulk batch, it’s different, you have proof!
Claims and Marketing: How NOT to get into trouble!Claims and Marketing: How NOT to get into trouble!
A supplier’s brochure usually contains statements that you can’t reproduce. When copying text from a competitor or supplier:
- Don’t be liable for disease or treatment claims unless you have a regulatory route for them.
- Avoid use of the phrase “FDA approved” unless the product has been approved.
- Be careful not to use the term “medical grade” unless you have a clear definition of what it means for your product and your market.
- Be careful with your wording, including “for relaxation and general wellness” if you’re positioning as a wellness product, and research local rules.
- Store the evidence file: test reports, certificates and instructions for use.
I’m putting this here, because many product pages from suppliers, and many generic pages throughout the industry, use wellness and medical jargon interchangeably. You are responsible for what you say if you are an importer or brand owner.
Eleven errors that I see purchasers make when buying red light mats suppliers.
- Comparing irradiance numbers without the distance or method.
- Taking a certificate logo, rather than a report.
- On neglecting the driver and the power supply.
- No sign on spec sheet – means that nothing is to compare to.
- Failure to make a golden sample.
- Stealing supplier claims and using them for their own.
- Ordering based on MOQ only and find poor QC attention to the small order.
- Not checking plug type and voltage for each market.
- Coverage of the cover material and bending of joints in the cable.
- No returns or warranty claim plan.
- Freight and duty/compliance cost in the landed cost underestimated.
This is an RFQ You Can Copy and Send.
- Type of product (flexible mat, rigid mat, panel, wrap) and size(s)
- Wavelengths and ratio (for example 660 nm / 850 nm)
- Measurements taken at the target irradiance and the measurement method (peak or average)
- The number of LED and their brand/model.
- Power (W), Input voltage, Input frequency, Power plug type for each market
- Intensity steps, pulse modes, auto shut off, app (yes/no), timer: Controller
- Heating function (yes/no), having temperature limits
- Materials: cloth for the cover, material for the body and colour.
- Certificates required: CE (LVD, EMC, RoHS), FCC, UKCA, SAA, IEC 60601 (if required), and test reports
- We have ISO 9001 and ISO 13485 Quality system certificates.
- When it comes to warranties and length of warranties and process of making claims.
- Packaging, labelling and instructions in required languages.
- The number of items, required sample and target lead time.
- Incoterms (EXW/FOB/DDP) and payment terms
The advantages of working with a direct manufacturer such as Sinoco.Why work with a direct manufacturer like Sinoco?
We develop and produce LED light therapy devices in Shenzhen, which include LED beauty and pet and equine treatments, LED wraps, blankets, LED mats and LED helmets. To see a full spec, go to our red light mat product page and view the light source (635/660/850 nm), power (80 W), body material, input range (100-277 V AC 50-60 Hz), size (1390 x 991 mm) and plug options. Explore the rest of our range of wellness light therapy, learn more about us or check out our blog.
The direct manufacturer is one point of accountability, one point of customisation and one point of technical answers from the people who made it. Target market & claims, size and wavelength needs will be sent to us via contact page and we will come back with a spec proposal.
What are some common questions about Red Light Mats Suppliers?
So, what exactly does a red light mats supplier do?
A red light mat supplier is a supplier who supplies red light mats and near-infrared LED mats for sale, private label or for professional use. The best can record performance, compliance and quality control.
What is the wavelength of the red light mats?
Typically, the two most commonly used wavelength combinations are red (660 nm) and near-infrared (850 nm). Some add 630, 810, 830 or 940 nm. Request measured wavelength and ratio of LEDs from each supplier.
What should be the irradiance of a red light mat?
This is based on the design and the method of measurement. There are a variety of published mats, ranging from approximately 30 mW/cm² near the surface to 130 mW/cm2 at zero distance. Always: ask what distance and if this value is peak or average.
How to use a red light mat for dose calculation?
Dose (J/cm²) = irradiance (mW/cm²) × time (seconds) ÷ 1,000. So, if 30 mW/cm2 is applied for 10 minutes, then 18 J/cm2 is obtained. Follow the directions for use on the product to get direction for the session.
Do we need a red light FDA clearance?
This will vary based on the claims. Products that are marketed under general wellness statements, but not for the treatment of any disease, may be under the FDA general wellness policy while products that make specific medical claims may require clearance, such as through 510(k). Get regulatory advice for your claims and market.
Does that mean “registered” the same as “approved” by FDA?
No. Registration is typically taken as registration of establishment and listing of devices. Clearance is different from approval, and the majority of light therapy devices are cleared, not approved.
Which are the required certificates for a red light mats supplier?
For Europe: CE (LVD, EMC) and RoHS. If your channel requires it, for the US: FCC, ETL or UL. For the UK: UKCA. Medical-adjacent suppliers can also offer IEC 60601 and IEC 62471 reports as well as an ISO 13485 Quality System.
What’s a normal MOQ for red light mats?
Minimums for marketplace items vary from one piece to minimums on larger custom OEM projects. Write confirmation to your specific exactly.
What’s the production time?
Small stock orders will ship within approximately 1 – 2 weeks on published orders, custom OEM/ODM projects will take more time. Make sure after the signed spec and sample is approved.
Can I get my own brand, logo and packaging?
Yes. A direct manufacturer provides private labelling, custom packaging, combinations of wavelengths, sizes and plug types, among other OEM/ODM options.
What can I do to prevent getting a different product from my sample?
Maintain a sealed sample of gold, sign a spec sheet including the information of LEDs, driver and materials, and agree to a method of bulk inspection with measured values.
Is the use of red light mats safe?
Design and electrical testing and proper use are the key to safety. Request safety and EMC reports, surface temperature information and use instructions, and recommend that end users seek advice from a healthcare professional if they have a medical condition, are pregnant or are taking photosensitising medication.
Conclusion: Purchase the evidence, not the listing!
As with any type of supplier, the better the case for a red light mats supplier, the more likely they are to be the ideal choice.As in any kind of business, the stronger the case a red light mats supplier can make, the better choice they will certainly be. Do the claims first, the dose and landed cost calculations, maintain a golden sample and document all this in a signed spec.
Once you are ready to discuss specs, check out our red light mat or submit your project information and we’ll send you a proposal.